BK PRECISION 1671A CALIBRATION and BK PRECISION 1671A REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the BK PRECISION 1671A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another DC Power Supply?
Shop for Comparable Products on our  used DC Power Supply page

 
   BK PRECISION 1671A   Description / Specification:   Spec Sheet 
BK PRECISION 1671A Triple Output DC Power Supply

The B+K Precision 1671A is a general purpose triple output DC power supply. Their main outputs are versatile constant voltage or constant current regulated power source that is variable from 0 to 30 volts and 0 to 5 amps. An indicator lights in the constant current mode, and serves as an overload indicator in the constant voltage mode. The main output voltage and current are continuously monitored by two digital LCD meters with resolution of 0.1 volt and 0.01 amp. Specifications. Number of Outputs: Three (1 variable, 2 fixed). Range: 0-30 V / 0-5 A (variable), 12 V ±5% / 500 mA (fixed), 5 V ± 5% / 500 mA (fixed). Constant Voltage Operation Line Regulation: <= 0.05% + 10 mV (main), <= 1% (fixed output). Constant Voltage Operation Load Regulation: <= 0.05% + 10 mV (main), <= 1% (fixed output). CV Ripple & Noise: <= 5 mV rms. Constant Current (CC) Adjustable Current Range: 5% to 100% (Main). CC Line Regulation: <= 0.4% + 10 mA. CC Load Regulation: <= 0.4% + 10 mA. CC Ripple & Noise: <= 10 mA rms. Display: 3-digit LCDs. Voltmeter Resolution: 0.1 V. Voltmeter Accuracy: ±(1% reading + 2 digits). Ampmeter Resolution: 0.01 A. Ampmeter Accuracy: ±(1% reading + 2 digits). Overload Protection: Current limiting, Reverse polarity, Overvoltage, Short circuit.



 

Standard Calibration $155.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the BK PRECISION 1671A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Average Power
Average power means that the energy transfer rate is to be averaged over many periods of the lowest frequency involved. For a CW signal, the lowest frequency and highest frequency are the same, so average power and power are the same. For an amplitude modulated wave, the power must be averaged over many periods of the modulation component of the signal as well.

Dynamic range
Dynamic range the ratio of a specified maximum level of a parameter, such as power, current, voltage or frequency, to the minimum detectable value of that parameter.

Modulation
Modulation is the process by which the characteristic of one wave (the carrier) is modified by another.

Repeatability
Repeatability is the variation in a number of repeated measured quantities when measurement conditions are changed and restored. The value corresponds to half the spread between the minimum and maximum value measured.

Please contact us for your BK PRECISION 1671A CALIBRATION and/or BK PRECISION 1671A Triple Output DC Power Supply REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: